In This Section
Perceptual Effects of Dynamic Range Compression in Popular Music Recordings - January 2014
Accurate Calculation of Radiation and Diffraction from Loudspeaker Enclosures at Low Frequency - June 2013
New Measurement Techniques for Portable Listening Devices: Technical Report - October 2013
AES Journal Forum
A 20 dB Audio Noise Reduction System for Consumer Applications
A 20 dB noise reduction system, designated C-type, for use in cassette tape recording and similar applications is described. An arrangement of two compressors and two expanders in cascade has been developed in which the signal-to-noise ratio improvement is compounded without significant accompanying increases of the overall maximum maximum compre;ssion and expansion ratio. Overshoots, modulation distortion, and noise modulation are well controlled. The maximum demands made on transmission channel uniformity are generally unchanged from those associated with the B-type system, although the uniformity requirements extend over a greater range of signal frequencies and levels. An improvement has been made in one condition of compressor/expander mistracking, namely, low-level mid-frequency signals in combination with dominant signals in the region above 10 kHz and incorrect channel response at such frequencies. A further development reduces the tendency of highly equalized channels to saturate, thereby increasing the useful signal levels which can be handled.
No AES members have commented on this paper yet.
Subscribe to this discussion
Start a discussion!
If you are not yet an AES member and have something important to say about this paper then we urge you to join the AES today and make your voice heard. You can join online today by clicking here.