The theoretical design and the preliminary practical implementation issues of an anechoic chamber designed specifically for spherical-wave propagation are described. Conventional anechoic chamber design methods dictate that the acoustic impedance of the chamber's boundaries should be purely resistive (complete absorption) over the whole operational range of the chamber. For good loudspeaker measurements at low frequencies, this means large chambers and long absorptive wedges. Theory suggests that a relatively small spherically shaped chamber, with the source constrained to the center of the sphere, could be designed that operates down to any arbitrary frequency, if the chamber walls are mass reactive at lower frequencies where the wavelengths are much larger than the chamber dimensions, and absorptive at higher frequencies where the wavelengths are much shorter than the chamber dimensions. A first-order mechanical model of the wall impedance is a massless plate for the sound waves to impinge upon, connected to a free-standing mass through a damper. At low frequencies the whole assembly moves, thus presenting a mass reactance to the wave, while at high frequencies the mass would be essentially immobile, and thus energy would be absorbed by the damper. The crossover point between the two modes of operation occurs at the frequency where the wavelength is equal to the circumference of the sphere, or equivalently, the radius of the sphere is about one-sixth wavelength. Derivations show that the total movable mass of the chamber's walls should be exactly three times the mass of the air contained in the sphere. These ideas are explored.

Author: Keele, Jr., D. B. (Don)
Affiliations: Audio Magazine, Hachette Magazines, Inc., New York, NY ; Techron, Div. Crown International Inc., Elkhart, IN ; DBK Associates, Elkhart, IN(See document for exact affiliation information.)
JAES Volume 42 Issue 6 pp. 454-466; June 1994
Publication Date: June 1, 1994

Click to purchase paper as a non-member or you can login as an AES member to see more options.

No AES members have commented on this paper yet.

Subscribe to this discussion

To be notified of new comments on this paper you can subscribe to this RSS feed. Forum users should login to see additional options.

Start a discussion!

If you would like to start a discussion about this paper and are an AES member then you can login here:
Username:
Password:

If you are not yet an AES member and have something important to say about this paper then we urge you to join the AES today and make your voice heard. You can join online today by clicking here.