In This Section
Audibility of a CD-Standard A/DA/A Loop Inserted into High-Resolution Audio Playback - September 2007
Reflecting on Reflections - June 2014
Quiet Thoughts on a Deafening Problem - May 2014
AES Convention Papers Forum
Vented-box Geometry and Low Frequency Reproduction: The Aerodynamical Approach
To-day, low frequency reproduction with loudspeakers in vented box is limited by two factors: the volume of the box, and non-linear airflow through the vent. We propose a novel approach that takes into account aerodynamical parameters, leading to original profiles and an improved functioning of the vented box. For example, under certain alignment conditions, there exists a second cut-off frequency below the first one, localised on the lower impedance hump. Using this lower cut-off frequency and an adapted vent profile makes it possible to radiate frequencies around 40 Hz with box volumes smaller than 1 liter and small drivers. A prototype will be demonstrated.
No AES members have commented on this paper yet.
Subscribe to this discussion
Start a discussion!
If you are not yet an AES member and have something important to say about this paper then we urge you to join the AES today and make your voice heard. You can join online today by clicking here.